Vacuum tube low-pressure SWH

  •      Rely on the natural circulation principle,Hot water rises naturally into the tank,while cold water flows down from . tank to vacuum tubes,causing circulation throughout the system.




    Installation model :




    Advantage

    ●Inner  water tank (interior)are made of SUS304-2B food grade 

    ●  Whole glass vacuum tubes adopt super hard borax

     stainless steel plates(thickness 0.5mm), out shell (exterior) 

         and silica glass.

     are made of colored steel plate (thickness:0.5mm) 

    ●  Absorb rate:=93%,thermal radiation rate:=6%(100℃)

      welded by argon arc.Water is pure and drinkable.

    ●  Resist 25mm hail,using life can last 15 years.

    ●  Heat insulation of water tanks adopts

    ●  Temperature when exposed to sun without water:

         polyurethane foam,thickness is 55mm.

          250℃,2.5hours to boiling if using single tube.

    ●  Silicon rings to connect and seal them.

    ●  If you use electrical appliances to aid heating,to

    ●  The tubes and supports are adjustable,power

          switch off the power supple before boiling.

       bearing is average,and can assure the vacuum

    ●  To test the water temperature before using,in order

          tubes to use for long time.

        to avoid scalding.














    Technical Specification

    Model

     Absorbing    

    Vacuum Tube

    Tank

    Qty (Sets)

    Area(㎡)

    Diameter

    Length

    No.(pcs)

    Capacity

    20"

    40"

    SKY420-1500/47-15

    0.75

    Φ47mm

    1500mm

    15

    85L

    66

    137

    SKY420-1500/47-18

    0.9

    Φ47mm

    1500mm

    18

    100 L

    56

    135

    SKY420-1500/47-20

    1

    Φ47mm

    1500mm

    20

    111 L

    50

    105

    SKY420-1500/47/24

    1.20

    Φ47mm

    1500mm

    24

    135 L

    44

    92

    SKY420-1500/47/30

    1.50

    Φ47mm

    1500mm

    30

    166L

    36

    75

     

     

    SKY470-1800/58-16

    1.37

    Φ58mm

    1800mm

    16

    140L

    44

    91

    SKY470-1800/58-18

    1.44

    Φ58mm

    1800mm

    18

    150L

    39

    81

    SKY470-1800/58-20

    1.60

    Φ58mm

    1800mm

    20

    165L

    35

    73

    SKY470-1800/58-24

    1.92

    Φ58mm

    1800mm

    24

    200L

    30

    62

    SKY470-1800/58-30

    2.40

    Φ58mm

    1800mm

    30

    250L

    24

    50

     Note :

     Area is the part of the collector that actively absorbs the light rays.For solar tubes this is  defined as the cross-sectional area of the inner tube (selective coated) measured using the  outside diameter. (Eg. 0.047×0.72m=0.08㎡)

     







    Element  part   (optional)

      

             Solar Controller                       heating elements                    Assistant tank                             Mg Anode 





  • mlnancy1